江蘇春晨電纜有限公司生產JFEM1140V電機引接線，多控就是在三個甚至更多的地方控制一盞燈。先看原理圖。
Multi control is to control a lamp in three or more places. Look at the schematic first.
雙控開關如何接線?雙控和多控開關實物接線圖
How to connect double control switches? Double control and multi control switch physical wiring diagram.
?多控電路兩端的K1和K3都是單開雙控，中間的是雙聯雙控開關，也叫一開多控開關，其實就是兩個單開雙控的復合體。它的正反面外觀如圖。
The K1 and K3 at both ends of the multi control circuit are both single open and double controlled. The middle is double double control switch, also called a multi control switch. In fact, it is the two single open double control ...plex. It has a positive and negative appearance.
雙控開關如何接線?雙控和多控開關實物接線圖JFEM1140V電機引接線
How to connect double control switches? Double control and multi control switch physical wiring diagram.
?L1 、L 11、L 12、是一組雙控開關。L2、L21、L22、是一組雙控開關。按下開關時兩組開關同時動作。其外部用導線將L11和L22、L 12和L21、連接。這樣無論原理圖上的K1和K3在什么樣的開關位置，按下中間的K2，電路都會接通。
L1, L 11, L 12, is a set of double control switches. L2, L21, L22, is a set of double control switches. When the switch is pressed, the two sets of switches are operated at the same time. The outer wires connect L11 to L22, L 12 and L21. So no matter what kind of switch location K1 and K3 are on the schematic and press the K2 in the middle, the circuit will be connected.
雙控開關如何接線?雙控和多控開關實物接線圖YFFB扁電纜YFFB起重機扁電纜
How to connect double control switches? Double control and multi control switch physical wiring diagram.
?多控開關的接線有點繞人。一定要看懂原理圖。多模擬幾個開關在不同位置，線路的通斷。
The connection of the multi control switch is a bit around. Be sure to understand the schematic. It simulates the on-off of several switches at different locations.
雙控開關如何接線?雙控和多控開關實物接線圖
How to connect double control switches? Double control and multi control switch physical wiring diagram.
?超過三個地方控制一盞燈的電路圖。原理都是一樣，就是多串了幾個單開多控開關。
There are more than three places to control the circuit diagram of a lamp. The principle is the same, that is, there are several single open multi control switches.
最后大家比較一下兩種一開多空開關的接線有什么不同。YFFB扁電纜YFFB起重機扁電纜
Finally, let's ...pare the wiring between two kinds of open and close switches.

公司主要的產品有：電力電纜、控制電纜、橡皮絕緣電纜、電焊機電纜、硅橡膠電纜，船用電纜、礦用電纜、聚氯乙烯絕緣電纜、計算機電纜、儀表電纜、電站用電纜、電機引接線、編織電線、高溫導線等。型號有：TVVB YFFB YVFB電梯扁電纜，YC YCB YCBP YGCB高壓橡套電纜硅橡膠電纜扁電纜，JXN JBQ JEM …